Spreadable, adhesive sealant for the natural design of terrarium backgrounds and artificial rocks
Solvent-free, good adhesion, high strength
Waterproof after drying
Pot life: approx. 1 hour at +20°C
Curing time: at 20°C approx. 24 hours
Processing temperature: +5°C to +35°C
Tip:
Optionally, you can use Rockoflex to create a dig-resistant substrate for Elastupor 2.0. Rockoflex and Elastupor 2.0 can be colored to your liking with Scapeline color pigment powder. Thoroughly mix the container contents, tinting with Scapeline color pigments. Apply a thick layer of the compound to the terrarium back wall made of Styrofoam or construction foam with a brush. A primer is required for glass surfaces. The maximum processing time at room temperature is approximately 1 hour. The applied compound can be coated with structural peat or dust-free sand, for example. Gently pat the coating substrate in with a hand brush.
Use Elastupor 2.0 to create natural-looking terrariums of any size, tailored to the needs of your terrarium animals. Whether a rainforest or desert terrarium, or even artificial rocks: with Elastupor 2.0 and a little craftsmanship, it’s no problem.
